We provide Gas Storage Tanks, Spheres, Spherical Tanks, Terminals, Transport Tankers, Mounded Bullets, Pressure Vessels, Gas Filling Plants, Gas Bottling Plants, Cylinders, Skids, Semitrailers and Reservoirs etc.

Introduction :-

We are exporter and manufacturer of LPG Mounded Bullets, Underground LPG Mounded Bullets at cheap cost. Lpg mounded bullet Volumes are from 500 M3 to 20000 M3 Total Storage, as well as Refrigerated mounded for propane storage. The Mounded Bullets are designed as per ASME Sec. VIII Div.1, ASME Sec. VIII Div.2 and BS 5500 codes. We have executed storage facility including Mechanical, Civil, Piping, Instrumentation and Electrical.
We undertake the Project Execution on LSTK/ EPCC (Engineering, Procurement, Construction & Commissioning) basis. The scope of EPCC Contracts include:

• Design and Detailed Engineering
• Fabrication, Testing, Procurement, Erection, of Piping and Mounded bullets.
• Safety measures like Fire Fighting etc.
• Supply and Installation of Cathodic Protection System.
• Ground Improvement & Civil works
• Electrical and Instrumentation work

• Total Project Commissioning for BULLET:

• 5 x 3000 cum. Mounded LPG Bullet.
• 5 x 1900 cum. LPG Mounded Storage Bullet.
• 4 x 1500 m3 LPG Storage Bullets
• 6 x 1650 cum. LPG Bullets.
• 2 x 2000 cum.LPG Mounded Storage Bullet Tanks.
• 2 x 2500 cum. LPG BULLET
• 4 x 2000 cum LPG BULLETS Tanks.

Technical Specification:

Design Code ASME, PD 5500, AD Merkbaltter and others.
Design Pressure 17.16 Bar
Design Temperature -20 Deg C to + 55 Deg C
Volume 500 M3 to 20000 M3 TOTAL STORAGE


We use various international design codes for designing of mounded horizontal cylindrical vessels as follows :
PD 5500: Specification for unfired Fusion welded pressure vessels

EEMUA: Guide for design , construction and use mounded horizontal cylindrical vessels for pressurized storage of LPG at ambient temperatures

EEMUA 190: Selection criteria LPG storage systems

ASME sec. VIII Div. 1 and 2

Material of construction: SA 537 CL 1 , SA 516 GR 70 , BS 1501-1 225 490 A , EN 10028-3 P355NL2 AND OTHERS

Advantages / Comparison of LPG Sphere and LPG Mounded Bullets


The choice between a bullet and a sphere is a matter of economics and project logistics. So one is better than the other only in the matter of which has a cheaper overall installed cost.

The sphere of course uses less material than a bullet for the same amount of liquid storage but is somewhat more difficult to fabricate. The diameter for shipping of a storage tank is in the order of 10 to 14 feet depending on the method of transport. This would limit a sphere's storage capacity if it is shop fabricated. For a 10 foot diameter tank, you can get 10 or more times the storage in a bullet than a sphere. For this reason, you usually only see spheres used for very large volumes (maybe in the order of 300,000 gallons or more) because they must be field fabricated to compete with the bullet in cost.

For smaller storage tanks, the bullets are preferred because they can be shop fabricated and more easily transported.



1) Least initial investment and financial risk in case of LPG multiple storage tanks of as compared to  sphere of similar or larger volume.

2) LPG sphere of same volume needs more time for construction as compared to LPG multiple storage tanks.

3) LPG Multiple LPG storage tanks makes the project faster, economical, easier and will in turn help the company to start the terminal as soon as possible which in turn will generate good immediate returns.

4) LPG Storage tanks are much safer since it weight is distributed evenly on a larger area thus reducing chances of collapse as compared to sphere, especially in small islands porne to earth quakes, cyclones and Tsunami as can be verified from the recent incident in Japan where a row of LPG sphere went under severe fire condition.

5) Multiple LPG storage tanks have an added advantage that the load is distributed over a larger area thus the problem of uneven settlement / collapse  is largely reduced.

6) In case of installations with Multiple LPG storage tanks if there is any problem / maintenance / repair / breakdown of any one tank the outlet and inlet valves of the same can be closed and the tank can be isolated, also in case of emergency the LPG product in the tank under repair / maintenance can be easily transferred to another tank located in the same plant thus increasing safety of the plant. Whereas in case of sphere if there is any problem with the sphere or its valves or pipeline the entire plant comes to a stand still (This is a loss to the company in terms of business loss, product loss, as well as extra demurrage that the company may have to pay to the shipping company if unfortunately the LPG ship also arrives the same time when the sphere has generated a possible breakdown). But in case of multiple storage tanks even if one of the tank generate a possible breakdown and the LPG ship also arrives the same time still the LPG from the ship can be unloaded to the remaining tanks and the company will have to incur least loss due to ship demurrage.

7) Though there is a common notion that for the same volume a sphere has the least surface area and least thickness and hence lesser weight and less cost but our past experience suggests that weight saved in making a sphere as compared to storage tank is lost as wastage in the development of various sections (petals and crown) thus leaving little or no benefit of the weight saved.

8) The fabrication cost increases considerably in case of sphere as compared to multiple LPG storage tanks , since the sections have to be pre fabricated at shop, shipped to site, adjusted, assembled and welded at site piece by piece in proper sequence, heat treated, radiographed and  tested at site. Fabrication of sphere requires lot of time since the petals / sections are required to be assembled piece by piece in proper sequence and completion of one stage is entirely dependent on completion of the earlier stage as so on and so forth. More over there is a continous requirement of close monitoring, blockage of all construction equipments and manpower  till the entire completion of work sequence by sequence, this makes the fabrication of sphere still more costlier and time consuming as regards to blockage of manpower, machinery rent etc.

9) Sphere once fabricated cannot be moved or relocated from one place to another and if in case any relocation (due to sale of plant or plant relocation) is required the sphere has to be cut into several small pieces and transported to site and then reassembled and re-fabricated at new site this is as good as manufacturing a brand new sphere at site and hence the after sale value of a sphere is much less and as compared to lpg storage tanks which can be sold out for good returns.



LPG Mounded Bullets, Cheap Mounded Bullets, Mounded Bullets Exporter, Mounded Bullets Manufacturer, Underground LPG Mounded Bullets, LPG Bullets Exporter From India, Gas Storage Tanks, Spheres, Spherical Tanks, Terminals, Transport Tankers, Mounded Bullets, Pressure Vessels, Gas Filling Plants, Gas Bottling Plants, Cylinders, Skids, Semitrailers, Reservoirs

LPG Mounded Bullets Exporter And Manufacturer by Bharat Tanks And Vessels LLP from India
LPG Mounded Bullet
Contact us

Bharat Tanks And Vessels LLP
B-21/22, Maya Nagari, Dapodi, Pune - 411012, Maharashtra, India.
Phone: + 91 - 20 - 6717 0410 / 14
Mobile: + 91 - 98220 76167
Email: enquiry@lpgmoundedbullets.com

Other products:

Ammonia Gas Cylinders And Tankers
Anhydrous Ammonia Container
Ammonia Rail Tank
Ammonia Sphere
Ammonia Spherical Tank
Ammonia Storage Tank
Anhydrous Ammonia Tank
Ammonia Transport Semitrailer

Butane Gas Tank
Butane Storage Tankers

Chlorine Gas Tank

• CO2
Carbon Dioxide Gas Tank
CO2 Gas Storage Tanks
CO2 Generation Plant
CO2 Liquid Gas Tankers
CO2 Recovery Plant
CO2 Storage Tank
Liquid CO2 Transport Tankers
Liquid Carbon Dioxide Tanks
Liquid CO2 Tank
Vacuum Insulated Liquid CO2 Gas Tanks

Ethylene Gas Tank
Ethylene Tank
Ethylene Oxide Tank

Fixed Roof Tank
Floating Roof Tank
Petroleum Vessels

GPL Gas Tanks
GPL Reservoirs

Hydrogen Gas Vessel

IMO 7 Tank
IMO Tank
IMO Tank Container

ISO Tank

Liquid Gas Tankers
Oil And Gas Storage Tank
Gas Tank Installation

Bulk LPG Gas Storage Tanks
Liquefied Petroleum Gas Tankers
LPG Bobtail
LPG Tanks Bulk Installation
LPG Bullets
LPG Carousel Plant
LPG Cylinder
LPG Cylinder Manufacturer
LPG Tender
LPG Filling Plant
LPG Gas Plant
LPG Gas Tank
LPG Equipment
LPG Horton Sphere
LPG ISO Container
LPG Mounded Bullets
LPG Mounded Vessels
LPG Semi Trailer
LPG Spheres
LPG Spherical Tank
LPG Storage Tanks
LPG Bottling Plant
LPG Tank Farm
LPG Terminal
Used LPG Bobtails
Used LPG Gas Storage Tank
Cheap LPG Gas Storage Tanks
Used LPG Gas Tanks
LPG Port Facility
LPG Gas Price

Liquid Nitrogen Tank
Nitrogen Gas Tank
LNG Storage Tanks
Nitrous Oxide Gas Tank

Surge Vessels

Oxygen Gas Tank

Propane Underground Tanks
Propane Spheres
Propane Spherical Tankers
Propane Storage Tanks
Used Propane Tankers

Propylene Gas Tank
Propylene Oxide Tanks
Propylene Storage Tankers
Propylene Tank

Syn Gas Tank
Coal Bedded Methane Gas Tank

Argon Tanks

CNG Storage Tanks

Lime Stone Filter Tanks